Advertisement
Quick Links
Advertisement
Related Manuals for Peak Pilates MVe Chair Split Pedal Split Pedal
Summary of Contents for Peak Pilates MVe Chair Split Pedal Split Pedal
- Page 1 Chair ® Split Pedal Upgrade Kit Split Pedal...
-
Page 2: Recommended Use
Congratulations on the purchase of your MVe Chair Split Pedal Upgrade Kit ® The Peak Pilates MVe Chair is one of the most versatile pieces of exercise equipment available today. Upgrading a Single Pedal Chair by adding the Split Pedal feature opens a whole new realm of exercise patterns. -
Page 3: Safety Statement
Safety Statement It is the responsibility of the purchaser of Peak Pilates products to instruct all individuals, whether they are end users or supervising personnel, on the proper use of the equipment. Inspect the machine including Springs, Pull Pin, and Release Pins before use. DO NOT exercise on the machine if signs of excessive wear or other defects are evident. -
Page 4: Assembly Instructions
Assembly Instructions 1. Carefully unpack and inspect the contents of the box. Use extreme care when cutting away the packing materials as the cutting tool/tools can scratch the surface of the parts. 2. Verify that you have received all parts and hardware by checking what is included in the box against the packing list below. - Page 5 6. Unscrew the four fasteners that assemble the right side, black plastic Swing Arm to the Foot Pedal Pivot Bar. NOTE: “Left” and “Right” are defined as the user’s left or right when sitting on the Chair with feet on the Foot Pedal. 7.
- Page 6 11. Slide the new, left side Handle Support Flange over the Foot Pedal Pivot Bar in the orien- tation shown. 12. Then slide the new Split Pedal Assembly and right side Handle Support Flange over the Foot Pedal Pivot Bar. Verify the orientation of all parts per the illustration to the left. 13.
- Page 7 18. Slide the end of one Spring into its notch at the end of the flange of one of the Spring Adjustment Sliders. Insert the Spring Retaining Pin. 19. Place an E-Clip so its legs engage the groove in the Spring Retaining Pin and either push or tap down with the end of a tool until it snaps into place.
- Page 8 User Guide Note: Stacking and unstacking the Split-Pedal Chair is done in the same manner as the Single Pedal Chair. Before stacking the Split Pedal Chair verify that the pin connecting the two halves of the Split Pedal is fully engaged (see “TO ENGAGE SINGLE PEDAL MODE” immediately below).