If at any time you have questions concerning any part of this manual, please contact Peak Pilates. We strongly advise that the fit reformer be used only by or under the supervision of a Certified Pilates Instructor. Peak Pilates offers education programs and can provide certification training.
They contain important information. If the labels are illegible or missing, contact your service representative for replacements. Visit the Peak Pilates website at www.peakpilates.com NOTE : We strongly recommend that all.users of Peak Pilates exercise equipment be informed of the following information prior to use.
We strongly recommend that the end user’s physical condition be evaluated by a physician prior to beginning any exercise program. NOTE : Understanding each and every warning to the fullest is critical. If any of these warnings are unclear, contact Peak Pilates for clarification. www.peakpilates.com...
Upholstery, ropes, foot strap, and double loops are warranted against defects in workmanship and/or materials for 60 days. This warranty refers to the Peak Pilates fit reformer and covers materials only. It remains in effect only under the following conditions: This machine is not modified in any way.
Foot Strap Head Rest Standing Platform Rail Foot Bar Head Rest Gear Change Bar Positioning Plate Stacking Bumper Support Block Gear Block (inside rail) Vertical Storage Carriage Reformer Springs Foot End Leg Bumpers Shoulder Pad Foot Bar Head End Leg www.peakpilates.com...
Package Contents Description Quantity reformer Frame Foot End Leg Head End Leg Button Head Screw (Legs to Frame) Washer (Legs to Frame) Allen Wrench M5 1 Heavy - Red Springs 2 Medium - Yellow 2 Light - Blue Riser Assembly Rope Assembly Double Loop Handle Long/Short Box...
Repeat the process for head end leg. Button Head Screws Go back and fully tighten all screws (torque to 12 ft-lbs or 16 N-m) with the provided M5 Allen wrench. www.peakpilates.com...
ASSEMBLY Attach the Springs Attach the reformer springs to the anchor bar on the underside of the carriage. The open part of the hook should be facing away from the carriage. Remove the shipping spacers located between the frame of the carriage and the aluminum rails. With two people holding the reformer, turn the unit over onto its legs.
LOCK IS ENGAGED BEFORE USE. Attach the Foot Strap To attach the foot strap, fasten one safety link to each of the eye bolts located under the foot end cross member. Tighten the safety link locking nuts. Attach Safety Links www.peakpilates.com...
ASSEMBLY Attaching the Reformer Springs The fit reformer comes with five reformer springs as described below: HEAVY – One heavy spring marked with a red tab. MEDIUM – Two medium springs marked with yellow tabs. LIGHT – Two light springs marked with blue tabs. WARNING AT LEAST ONE SPRING MUST BE ATTACHED TO THE GEAR BAR AT ALL TIMES.
To change the headrest to the fully raised position: Lift the headrest and push the headrest support block in all the way. WARNING VERIFY THAT THE HEADREST SUPPORT BLOCK IS PROPERLY SET BEFORE BEGINNING ANY EXERCISE. www.peakpilates.com...
OPERATION Adjusting the Foot Bar The foot bar has four positions – three functional and one for storage. Three Functional Storage Positions Position To disengage and change the position of the foot bar: Lift the rod at the end of the foot bar support bar out of its locating slot while holding the foot bar with your other hand.
™ The fit reformer is unique in its design and can be easily stacked without the removal of any parts. Place the gear bar and gear block in position 3. Make sure at least the center spring remains hooked to the gear bar.
Vertically Storing the fit reformer ™ To vertically store the fit reformer: Place the gear bar and gear block in the -1 position. Make sure that at least the center spring is hooked onto the gear bar. Place the foot bar in its highest position.
Page 17
As Needed Inspect: Overall Machine Springs Tracking System Hardware Clean: Frame Upholstery Tracking System Replace: Springs Ropes Double Loops Safety Clips Refer to the next page for details. www.peakpilates.com...
Page 18
OPERATION Inspect ☑ Overall Machine ☑ Springs ☑ Tracking System ☑ Hardware Overall Machine: We highly recommend that you visually inspect the machine daily. Springs: Even with extensive pre-testing and rigorous quality inspections, the possibility of spring failure exists. In addition, severe nicks or abrasions may develop as a result of misuse and could lead to springs breaking prematurely.
Need help?
Do you have a question about the fit reformer and is the answer not in the manual?
Questions and answers