Afina™ 4 Assembly Guide - Peak Pilates AFINA Owner's Manual And Assembly Manual

AFINA™ 4 ASSEMBLY GUIDE
For the clients that have chosen leather straps and handles, the head end of the
frame will have the pulleys preinstalled for using the leather straps. In addition, the
leather handles will have clips attached so they can easily snap on to the end of the
leather straps.
All straps, ropes and handles must be secured before use. These are the moving
parts that are frequently interchanged with other accessories and they are essential
to providing the fluid movement. Before use, be sure that the ropes and straps are
not twisted so they can easily move through the pulleys
Installing the Leather Straps
1. Snap the leather handles onto the steel rings at the end of the leather straps.
2. With the gear bar and carriage stop in the Position 1, place the handles over
the shoulder blocks on the carriage.
3. Thread the loose ends of the straps through the pulleys mounted at the head
end of the reformer frame. Loop the ends of the straps back toward the
carriage, ensuring that the strap is not twisted.
4. Unscrew the black knobs on the underside of the carriage (on each side of
the headrest) to reveal the screw post.
Note: If top mounting of the knob is desired, the screw post can be unbolted,
flipped and installed in the opposite direction.
5. Feed the loose ends of the straps through the slots at the head of the
carriage. Pull the straps to remove any slack. Align the nearest hole in the
straps with each screw posts. Slide the selected hole in each strap over each
screw post.
6. Re-screw the black knobs back onto the screw posts, tightening the knobs
against the straps until they are secure.
7. Thread the loose ends of the leather straps through the cutouts underneath
metal frame on the carriage to prevent the ends of the straps from dragging
along the ground.
15
PEAK PILATES
®