Voltage Measurement (Dc); Resistance Measurement - JLG 1932RS/6RS Service And Maintenance Manual

SECTION 7 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
Voltage Measurement
Figure 7-1. Voltage Measurement (DC)
• If meter is not auto ranging, set it to the correct range
(See multimeter's operation manual)
• Use firm contact with meter leads
7-2

Resistance Measurement

Figure 7-2. Resistance Measurement
• First test meter and leads by touching leads together.
Resistance should read a short circuit (very low resis-
tance)
• Circuit power must be turned OFF before testing resis-
tance
• Disconnect component from circuit before testing
• If meter is not auto ranging, set it to the correct range
(See multimeter's operation manual)
• Use firm contact with meter leads
3121273