Adapting The Back Upholstery; Changing The Back Angle; Push Handles, Height-Adjustable - Otto Bock Motus CV Instructions For Use Manual

Adjustment/Assembly instructions

6.13 Adapting the back upholstery

You can adjust the back upholstery in segments according to your needs.
To do this, remove the back upholstery padding and undo the hook-and-loop fasteners of the
straps .
Reposition the straps as desired, attach them again with the hook-and-loop fasteners and pull
on the back upholstery padding.

6.14 Changing the back angle

It may be useful to customise the preset angle between the seat and the backrest for therapeutic
reasons. The angle can be adjusted between 90° and 120°.
Pull the release cable of the back release until the angle adjustment is released. Bring the
backrest into the desired position and release the release cable. Ensure that the locking bolts
are safely locked on both sides.

6.15 Push handles, height-adjustable

To adjust the suitable height of the push handles, use the adjustable clamping lever to loosen
the clamping screws.
Be sure to snugly re-tighten the clamping levers after all adjustments!
INFORMATION
68 | Ottobock
B
56
58
57
Motus CV/CS