Seat Upholstery; Adapting The Back Upholstery - Otto Bock M1 Intro Instructions For Use Manual

6.12 Seat upholstery

Should your seat upholstery become stretched out after longer use, contact your dealer to have
it replaced with a new seat upholstery.

6.13 Adapting the back upholstery

If you have selected the option "adaptable back upholstery", you can adjust the back upholstery
in segments according to your needs.
INFORMATION!
To do this, remove the back upholstery padding and undo the hook-and-loop
fasteners of the straps. Reposition the straps as desired, attach them again with
the hook-and-loop fasteners and cover with the padding.
DANGER!
Using your Otto Bock product as a seat for transportation in motor vehicles for
disabled passengers
Whenever possible, users should be transferred to the seats installed in the motor
vehicle for disabled passengers. The corresponding restraint systems should also
be used. Only this can ensure optimal protection of the passengers in case of an
accident.
The modules M1, M2, M3, M5 and M6 have been approved as transportation seats in
motor vehicles for the disabled under the condition that Otto Bock safety components
as well as appropriate restraint systems are used.
For more information, please refer to our instructions for use manual "Using your Wheelchair/
Mobility Base with Seating Shell or Buggy/Stroller as a Seat for Transportation in Motor
Vehicles", order no. 646D158.
(no figure)
(Fig. 33)
33
59