Otto Bock Motus CV Instructions For Use Manual page 72

Changing tyres
Inflating
• Check around the tyre on both sides to ensure that the tube is not clamped between the edge
of the tyre and the rim.
• Push the valve back slightly and then pull it out again to ensure that the tyre is properly seated
in the valve area.
• Inflate the tyre until it can still be pressed easily with your thumb. If the control line on both
sides of the tyre is equally distanced to the rim, the tyre sits centrally. If the tyre does not sit
centrally, let out some air and realign the tyre. Then inflate the tyre to maximum operating
pressure and tighten the dust cap.
72 | Ottobock
63 64
Motus CV/CS