Adapting The Back Upholstery; Changing The Back Angle - Otto Bock Motus Instructions For Use Manual

6.13 Adapting the Back Upholstery (Fig. 54)
You can adjust the back upholstery in sections according to your needs.
To do this, remove the back upholstery padding and undo the hook-and-loop fasteners of the straps
(Fig. 54).
Position the straps as desired, then reattach them with the hook-and-loop fasteners and reapply the back
upholstery padding.
6.14 Changing the Back Angle (Fig. 55)
It may be useful to customize the preset angle between the seat and the backrest for therapeutic
reasons. The angle can be adjusted between 90° and 120°.
Pull the release cable of the back release (Fig. 55, arrow B) until the angle adjustment is released. Bring
the backrest into the desired position and release the release cable. Ensure that the locking bolts are
safely locked on both sides.
B
54 55
27