Attaching The Safety Belt; Maintenance, Cleaning, And Disinfection; Maintenance - Otto Bock Motus CV Instructions For Use Manual

6.16 Attaching the safety belt

Attach the safety belt with the screws provided to the uppermost bore hole of the posterior frame
part.

7 Maintenance, cleaning, and disinfection

7.1 Maintenance

Your wheelchair has been provided with the CE sign. The manufacturer herewith guarantees
that this medical product as a whole conforms to the requirements of the European Directive for
Medical Products 93/42/EEC.
The proper function of the wheelchair, especially of the brakes, should be checked before every
use. Safety nuts should be used only once. If they have been loosened several times, they must
be replaced.
Should any problems or wear be encountered, please contact your authorised specialist dealer
immediately in order to have them corrected. This is particularly important if you notice that the
driving characteristics change or the wheelchair becomes less stable. We also recommend that
you have the wheelchair serviced every 12 months by your Ottobock authorised dealer. The
following table lists functions which the user must check at the indicated intervals.
Check
Function test of the wheel locks and drum brake
Sagging of the seat or back upholstery
Footplate stability
Sight-check of wearing parts
Dirt on bearings
Push ring damage
Motus CV/CS
59
before each use
X
Maintenance, cleaning, and disinfection
monthly quarterly
X
X
X
X
X
60
Ottobock | 69