Table 2-8 Connectors Of Exife-C1; Figure 2-22 Insert The Exife-C1 Board - NEC SL2100 Hardware Manual

ISSUE 1.0
No. Connectors
J1 Back Plane Board
J2 (EXP) Expansion Connector
1.7.3.3 Installing the EXIFE-C1 Board
Not all boards are hot swappable. Do not remove or install from the chassis
when powering up.
Do Not Power on until all installations have been completed.
1. Turn off the system power.
2. Insert the EXIFE-C1 board in the guide rail of Expansion Chassis and push it securely into
position and tighten the two screws of EXIFE board.
Hardware Manual

Table 2-8 Connectors of EXIFE-C1

Connector on the Back Plane Board
J1 (EXP1) or J2 (EXP2) connector on the EXIFB-C1 board of the Main Chas-
sis
Guide rail

Figure 2-22 Insert the EXIFE-C1 Board

Connectable Devices
EXIFE-C1
SL2100
Screws
2-17