Figure 2-112 Headset Socket (Ip Multiline Telephone); Figure 2-113 Doorphone Box And Bracket; Wall-Mounting The Doorphone - NEC SL2100 Hardware Manual

SL2100
PC(X)
LAN(=)
HAC

Figure 2-112 Headset Socket (IP Multiline Telephone)

The headset configuration is assigned using system programming.
5.5 Installing the Doorphone Box, Security Sensor Device (locally procure)
The Doorphone Box is a self-contained, water-resistant, Intercom unit typically used to monitor an
entrance door. A visitor at the door can press the Doorphone Box call button (like a door bell). The
Doorphone Box then sends chime tones to all extensions programmed to receive chimes. The
External Sensor device can be connect to the system. The system can have up to six Doorphone
Boxes or Security Sensor devices. A maximum two Doorphone Boxes or Security Sensor devices can
be connected per 308U-A1 or 082U-B1.

5.5.1 Wall-Mounting the Doorphone

1. Remove the screw on the front of the Doorphone Box.
2. Remove the Wall-Mount bracket from the Doorphone Box.
3. Connect the cable to the screw terminals on the Doorphone box. (No polarity sensitive)
4. Mount the Wall-Mount bracket on the wall using supplied screws.
2-80
HEADSET
HANDSET
< Bottom view>
Wall-mount
bracket
Screw
terminals
Connect cable

Figure 2-113 Doorphone Box and Bracket

Headset socket
PC(X)
LAN(=)
Upper housing
ISSUE 1.0
HEADSET
HANDSET
Screw
Installation