Figure 2-19 Exifb-C1 Board Installation - NEC SL2100 Hardware Manual

ISSUE 1.0
4. Mount the EXIFB-C1 daughter board onto the CPU board using four Metal Spacers, four spring
washers, four screws and four nuts.
To install the EXIFB-C1 daughter board:
1. Four Metal spacers, nuts, spring washers and screws are included with the EXIFB-C1
daughter board. Install the metal spacers through the CPU-C1 board using four nuts and
spring washers.
2. Position the EXIFB-C1 J3 connector over the J22 connector on the CPU-C1 board. Press the
CPU-C1 board and EXIFB-C1 daughter board together.
3. Screw the EXIFB-C1 daughter board using four screws. (refer to
Board Installation on page
Be careful not to damage the components on the CPU board and EXIFB
daughter board when installing.
Nuts
Spring washers
CPU board
Metal Spacers
EXIFB-C1
Hardware Manual
2-15)

Figure 2-19 EXIFB-C1 Board Installation

SL2100
Figure 2-19 EXIFB-C1
Spring washers
J22
Metal Spacers
J3
Screws
2-15