ISSUE 1.0
3.
Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to
4.
Install two screws into a wall. The screw heads must be remained about 3 mm (0.12").
83.5 mm
(3.287")
5.
Mount the telephone on the wall.
Wall-mounting
holes
Hardware Manual
Figure 2-92 Hook-Switch Hanger on page
Hook-switch hanger
Figure 2-100 Hook-Switch Hanger
Figure 2-101 Wall-Mount Screw Guide
Figure 2-102 Mounting the IP Multiline Telephone
2-70.
Hook-switch hanger
3 - 4 mm
1 - 3 mm
(0.12" - 0.16")
(0.04" - 0.12")
7 - 9.5 mm
(0.28" - 0.37")
Minimum 10 mm (0.39")
SL2100
Wall side
2-75