Table 2-12 Expansion Board Packing List; Boards - NEC SL2100 Hardware Manual

ISSUE 1.0
S 3 INSTALLING THE EXPANSION INTERFACE BOARDS
ECTION
3.1 General
Not all boards are hot swappable. Do not remove or install from the chassis
when powering up.
The system does NOT ALLOW to accommodate both Digital (2W) and Hybrid
(4W) Multiline Terminal at the same time on a system. Type of available
Multiline Terminals shall be defined whether 082U board can be detected at
Main Chassis or not during the system start-up in progress by COLD start.
Except 1PRIDB daughter board, up to four expansion interface boards can be installed per Chassis.
Equipment Name
IP7WW-308U-A1
IP7WW-082U-B1
IP7WW-008U-C1
IP7WW-000U-C1
IP7WW-3COIDB-C1
IP7WW-2BRIDB-C1
IP7WW-1PRIDB-C1
• The function of IP7WW-000U-C1 board is just a mounting board for the 3COIDB, 2BRIDB or 1PRIDB.
• One 1PRIDB can be installed per one chassis.
• The 3COIDB-B1, 2BRIDB-C1 and 1PRIDB-C1 can be installed in following combinations;
Daughter Board
3COIDB-C1
2BRIDB-C1
1PRIDB-C1
3.2 Unpacking
Unpack the 308U-A1/082U-B1/008U-C1/000U-C1/3COIDB-C1/2BRIDB-C1/1PRIDB-C1 and check it
against the following list. Inspect for physical damage.
Items
IP7WW-308U-A1
IP7WW-082U-B1
IP7WW-008U-C1
IP7WW-000U-C1
IP7WW-3COIDB-C1
Hardware Manual
Equipment Description
3 Analog Trunks + 8 Hybrid (4W) Extensions Board
8 Digital Extensions + 2 Analog Extensions Board
8 Hybrid (4W)/Analog Extensions Board
0 Extensions Board (for Trunk DB)
3 Analog Trunks Daughter Board (mount to 082U/008U/000U)
2 ISDN BRI Daughter Board (mount to 082U/008U/000U)
1 ISDN PRI/T1/E1(for Latin America) Daughter Board (mount to 082U/
008U/000U)
308U-A1
No
No
No

Table 2-12 Expansion Board Packing List

List of Contents
308U-A1 Board
082U-B1 Board
008U-C1 Board
000U-C1 Board
3COIDB-C1 Board
Screw (with Washer and Spring Washer)
Option Board
082U-B1 008U-C1
Yes Yes
Yes Yes
Yes Yes
QTY
1
1
1
1
1
1
SL2100
Note
000U-C1
Yes
Yes
Yes
Note
2-41