Cabling And Setting Ip7Ww-1Pridb-C1 - NEC SL2100 Hardware Manual

ISSUE 1.0
2. Connect the cables from the NT1 Network Termination cable to the J2 or J3 connector on the
2BRIDB-C1 daughter board.
Connector J2 - BRI1: Use switches J12, J13, J14
Connector J3 - BRI2: Use switches J15, J16, J17
Ensure that you set all switches correctly for each BRI circuit.
T S
J13

3.4.8 Cabling and Setting IP7WW-1PRIDB-C1

The E1 standard may differ from country by country. The conformity test must
be required before setting the E1 Trunk.
This IP7WW-1PRIDB-C1 board provides one RJ-45 PRI/T1/E1 connection.
Hardware Manual
IP7WW-2BRIDB-C1
T S
J13
J14
Figure 2-71 Switches Location of 2BRIDB-C1
T
J16 J17
J16
J14
J2
BRI 2 BRI 1
SL2100
S T S
J17
2-55