Fronius TransTig 2200 Comfort Operating Instructions Manual page 73

Upslope, 2-step mode
Unit s
Setting range 0,0 - 9,9
Factory setting 0,1
IMPORTANT! The upslope is saved separately for 2-step and 4-step modes.
Main current, 2-step mode
Unit A
Setting range MW 2500 Comfort 3 - 250
MW 3000 Comfort 3 - 300
Factory setting -
IMPORTANT! On welding torches with the Up/Down function, the entire setting range
can be selected while the device is idling. During welding, the main current can be cor-
rected in steps of +/-20 A.
In the case of 4-step mode
Unit % (of main current)
Setting range 0 - 100
Factory setting 50
Upslope, 4-step mode
Main current, 4-step mode
TT 2500 Comfort 3 - 250
TT 3000 Comfort 3 - 300
73