Setting Up A Conference During Recording; Adding Conference Participants During The Recording; Your Call Is Included In A Conference During The Recording; Putting A Line On Hold Manually During The Recording - Siemens HIPATH 8000 User Manual

Call recording
Step by step
192
Your call is included in a conference during
the recording.
Prerequisite: You are conducting a call that is being
recorded. You are to be included in a conference by your
call partner. You are placed on hold while the
conference is being set up.
Z
You hear the music on hold while your call partner is
setting up the conference. The recording is paused and
the recording symbol
display.
[
Your call partner answers again and you are connected
|
to the conference. You hear a beep and the recording
symbol
conference call is now being recorded.
Putting a line on hold manually during the
recording
There are two options for placing a line manually on
hold:
• You place the active line on hold during the call
recording and then resume the call on this line.
• You seize a different line during call recording. The
first line is placed on manual hold.
Prerequisite: The telephone has more than one line
configured. The active line is being recorded. The
recording button LED is lighting.
Holding and retrieving the call on the line
[
You are conducting a call, for example on line A. You
hear a beep and the recording symbol
the display. The call is now being recorded.
R
Press line key A. The line key LED starts flickering. The
call is placed on hold. The recording is paused while the
call is on hold. The recording symbol
disappears.
|
has disappeared from the
is shown in the "Conference" line. The
|
is shown on
|
on the display