Switching From Handset To Speakerphone Mode; Switching From Speakerphone Mode To The Handset - Siemens HIPATH 8000 User Manual

Step by step
n
Switching from handset to speaker-
phone mode
Make note of the two different processes and ac-
tivate your preferred setting as required
Prerequisite: You are conducting a call via the handset
and the microphone and loudspeaker functions have
been activated by service personnel.
Open listening in standard mode
\
and Hold down the key and replace the handset. Then re-
lease the key and proceed with your call.
Open listening in US mode
If open listening is set to US mode, you do not have to
hold down the loudspeaker key when replacing the
handset to switch to speakerphone mode.
n
Press the key shown.
\
Replace the handset. Proceed with your call.
{ }
or
A secure voice communication is indicated by a
closed padlock icon on the graphic display; a non-
secure voice communication is indicated by an
open padlock icon on the graphic display (see
also
Switching from speakerphone mode to
the handset
Prerequisite: You are conducting a call in speaker-
phone mode.
^
Lift the handset.
n
The key shown goes out.
page 173.
page 40)
Basic functions
45