Settings For Multiline (Keyset); Displaying The Line In The "Overview" Tab - Siemens HIPATH 8000 User Manual

Making calls with multiple lines
Step by step
Settings
User
Configuration
Keyset
Lines
Line 1
Allow in overview
Yes
Save & Exit
128

Settings for MultiLine (keyset)

The details for each keyset line contain supplementary
information for the user. The following uneditable fields
are displayed:
• Address
– Displays the phone number for the line
• Ringtone on/off
– Shows whether the ringer is activated for this line
• Selection sequence
– Displays the priority of each line seizure when the
handset is lifted or the loudspeaker key for this
line is pressed

Displaying the line in the "Overview" tab

Specify here if the selected line should be displayed in
the "Overview" tab.
z You can also configure this setting via the Web interface
page 195.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
if nec. Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the required line (for example, line 1).
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.