Siemens HIPATH 8000 User Manual page 126

Making calls with multiple lines
Step by step
\ n
or
Complete transfer
\ n
or
Disconnect & return
126
Connecting with consultation
S
Press the DSS "Executive 1" key. "Executive 1" answers.
Announce the call.
o
or Press the hang-up, loudspeaker or headset key.
You can also select "Complete Xfer" from the con-
text ment.
Connecting without consultation
S
Press the DSS "Executive 1" key. "Executive 1" does not
answer.
Select and confirm the option shown in the pop-up
menu.
o
or Press the hang-up, loudspeaker or headset key. The
"Executive 1" phone rings.
If "Executive 1" does not answer the call, a callback (see
also page 90) will ensue after a configured time.
The "Executive 1" direct station selection key on
the "Secretary 1" phone illuminates.
Consultation without connecting
S
Press the DSS "Executive 1" key. "Executive 1" answers.
Transferring is not wanted. The "Secretary 1" takes the
call back
Select and confirm the option shown in the pop-up
menu. The "Secretary 1" is reconnected with the caller.
Toggle, disconnect or conference
During a consultation call "Secretary 1" can toggle be-
tween "Executive 1" and the caller, can initiate a confer-
ence or disconnect one of the two call parties. More on
this subject can be found on pages
page 100.
page 57 and