External Calls; Calling An Outside Number - Siemens 300Series User Manual

External Calls

Calling an Outside Number

To call outside your communications server system, you must first dial
your trunk (outside line) access code before dialing the number you
want to reach.
If all trunks are busy when you make your call, you will hear a fast
busy tone. If your system has queuing, you will receive the queuing
tone and can then use Trunk Callback Queuing or Trunk Standby
Queuing to wait for the next available trunk. See "Trunk Callback
Queuing" on page 3-41 and "Trunk Standby Queuing" on page 3-42.
In this guide, 9 is used as the access code for a trunk. Your
communications server system administrator can tell you your trunk
access code.
Your system's trunk access code _______.
Your system may also prompt you to enter a personal identification
number (PIN) to make an external call. See "Personal Identification
Number (PIN)" on page 1-13 and "Forced Authorization" on page
7-15.
To call an
outside number
2-8 ROLMphone 300/600 Series User Guide
Get a dial tone.
Dial 9.
Listen for the external dial tone.
Dial the outside number.
If your system prompts you for a PIN, enter
your PIN.