Siemens 300Series User Manual page 130

To assign a call to
an account dur-
ing the call
7-2 ROLMphone 300/600 Series User Guide
Press the Account key. If you have a
display telephone, ENTER ACCOUNT
CODE is displayed. (If a default account
number has been set up for you at the
communications server, ACCT CODE is
displayed, followed by your default
account number. If you want to charge the
call to your default account, you will not
need to dial an account number.)
Dial the account number.
OR
Ask the other party to hold.
Press the Transfer (TRANSFR) key.
You will hear the confirmation tone,
followed by the internal dial tone.
Dial * 2.
You will hear the confirmation tone,
followed by the internal dial tone. If you
have a display telephone, ENTER
ACCOUNT CODE is displayed. (If a
default account number has been set up for
you at the communications server, ACCT
CODE is displayed, followed by your
default account number. If you want to
charge the call to your default account, you
will not need to dial an account number.)
Dial the account number.
Listen for the confirmation tone. If you
have a display telephone, STORED is
displayed.