Two-Way Speaker Call - Siemens 300Series User Manual

Two-Way Speaker Call

The Two-Way Speaker Call feature lets you make a two-way call to
the speaker of another telephone. If the other party does not have a
speakerphone, they must pick up the handset to answer.
To make a two-
way speaker call
To make a two-way call to the speaker of a telephone within your com
group, use the Intercom Call feature. (See "Community (Com) Group
Speaker Call" on page 3-20.)
You will hear the confirmation tone. The
other parties will hear a special tone.
Begin speaking. The other party must pick
up the handset to answer.
If one of the parties you have called lifts his
handset, a two-way (not speakerphone)
connection will be established with that
party. The other parties will be
disconnected.
A party you have called can disconnect by
pressing the line key or the Speaker key. If
this party is the last one in the multiple line
appearance, the call is disconnected.
Press the Two-Way Speaker Call
(SPK2WAY) key.
Dial the extension.
You will hear a single beep. The other
party will hear a double beep.
Begin speaking. If the other party does not
have a speakerphone, they must pick up the
handset to answer. You and the other party
will hear single beeps periodically until the
other party picks up the handset.
Making Calls 3-33