Siemens 300Series User Manual page 115

To set up
Variable
Forwarding
options on a non-
display phone or
on a display
phone without a
Program key or a
Forward key
While the forwarding option you want to
use is displayed, dial the extension to
which you want your calls forwarded. For
all-condition forwarding (FWD-ALL-
BOTH, FWD-ALL-EXT, FWD-ALL-
INT), you can dial 9 and an outside number
as your forwarding target.
Your primary line key status light flickers
and the Forward status light turns on to
indicate that Variable Forwarding is active
for your extension. STORED is displayed,
followed by the option you chose, the
number to which your calls are forwarded,
and ON.
Press PROGRAM. The Program status
light turns off.
Get a dial tone.
Dial one of the following access codes to
specify under which conditions you want
your calls to be forwarded:
— # 9 1
Forward both internal and external calls
under all conditions.
— # 9 2
Forward all external calls under all
conditions.
— # 9 3
Forward all internal calls under all
conditions.
Moving Calls 5-5