Removing Yourself From A Hunt Group; Setup - Siemens 300Series User Manual

Removing Yourself from a Hunt Group

If you want to prevent hunt group calls from advancing to your phone,
you can use the No-Hunt feature to remove your phone from the group.
Hunt group calls will then skip your phone and advance to the next
phone in the group. This has no effect on calls placed directly to your
phone unless it is in Do Not Disturb mode. (See "Do Not Disturb" on
page 6-1.)
If all members of a station hunt group remove themselves, hunting
will not occur.
All but one of the members of a pilot hunt group can remove
themselves. If the last remaining member tries to leave the hunt group,
he or she will receive an error tone.

Setup

To set up your
station hunt
destination for
the first time
7-8 ROLMphone 300/600 Series User Guide
Get a dial tone.
Dial # * 9 0.
You will hear the confirmation tone,
followed by the dial tone. If you have a
display phone, STATION HUNT is
displayed.
Dial the primary extension of the member
to whom you want to advance calls.
You will hear the confirmation tone. If you
have a display phone, STATION HUNT
and your destination are displayed.
Hang up.
Join your hunt group, as described on page
7–10.