System Hold - Siemens 300Series User Manual

System Hold

System Hold lets you move a call to a system slot (a temporary holding
place) and hold it there. The call can then be retrieved from any
extension.
To place a call on
system hold on a
display
telephone
Press the System Hold (SYSHOLD) key.
CALL PARKED IN SLOT and the number
of the slot to which the call has been
assigned are displayed.
Hang up.
Notify the party who will be retrieving the
call of the assigned slot number.
OR
Press the Transfer (TRANSFR) key.
You will hear the confirmation tone,
followed by the dial tone.
Dial * 8.
Dial the number of the system slot. CALL
PARKED IN SLOT, followed by the
number of the slot to which the call has
been assigned, is displayed.
You will hear the confirmation tone.
Hang up.
Notify the party who will be retrieving the
call of the assigned slot number.
Moving Calls 5-13