System Hold - Siemens Optiset E Entry Quick Reference Manual

System Hold

System Hold lets you move a call to a system slot (a temporary
holding place) and hold it there. The call can then be retrieved
from any extension.
To place a call on system hold,
1.
TRANSFR
2.
To retrieve a call on system hold,
1.
2.
SYSHOLD
3.
Press the Transfer (TRANSFR) key. You will hear
the confirmation tone and dial tone. Dial ∗ 8.
Enter a slot number (0-9). If you hear a busy signal,
try a different slot number. If all slots are full, you
will hear a fast busy signal. Then hang up.
Get a dial tone.
Press the System Hold (SYSHOLD) key, or
dial ∗ 8.
Dial the number of the system slot where the call is
on system hold.
25