H3C MSR 2600 Configuration Manual page 112

Figure 39 Network diagram
Configuration procedure
Before performing the following configuration, make sure the device and the host can reach each other,
and the IPv6 addresses of the interfaces are configured, as shown
1. Configure the DNS server:
The configuration might vary with DNS servers. The following configuration is performed on a PC
running Windows Server 2003. Make sure that the DNS server supports the IPv6 DNS function so
that the server can process IPv6 DNS packets, and the interfaces of the DNS server can forward
IPv6 packets.
a. Select Start > Programs > Administrative Tools > DNS.
The DNS server configuration page appears, as shown in
b. Right-click Forward Lookup Zones, select New Zone, and then follow the wizard to create a
new zone named com.
Figure 40 Creating a zone
c. On the DNS server configuration page, right-click zone com, and select Other New Records.
Figure
97
39.
Figure 40.