Verifying The Configuration - H3C MSR 2600 Configuration Manual

[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] ipv6 address 2::1 64
[RouterA-Ethernet1/2] quit
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ipv6 address 1::1 64
# Enable the DHCPv6 relay agent on Ethernet 1/1 and specify the DHCPv6 server on the relay
agent.
[RouterA-Ethernet1/1] ipv6 dhcp select relay
[RouterA-Ethernet1/1] ipv6 dhcp relay server-address 2::2
2. Configure Router A as the gateway, enable Router A to send RA messages, and turn on the M and
O flags.
[RouterA-Ethernet1/1] undo ipv6 nd ra halt
[RouterA-Ethernet1/1] ipv6 nd autoconfig managed-address-flag
[RouterA-Ethernet1/1] ipv6 nd autoconfig other-flag

Verifying the configuration

# Display DHCPv6 server address information on Router A.
[RouterA-Ethernet1/1] display ipv6 dhcp relay server-address
Interface: Ethernet1/1
Server address
2::2
# Display packet statistics on the DHCPv6 relay agent.
[RouterA-Ethernet1/1] display ipv6 dhcp relay statistics
Packets dropped
Packets received
Solicit
Request
Confirm
Renew
Rebind
Release
Decline
Information-request
Relay-forward
Relay-reply
Packets sent
Advertise
Reconfigure
Reply
Relay-forward
Relay-reply
Outgoing Interface
: 0
: 14
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 7
: 0
: 7
: 14
: 0
: 0
: 7
: 7
: 0
224