H3C MSR 2600 Configuration Manual page 167

Verifying the configuration
After completing the configurations, both internal and external hosts can access the internal servers by
using domain names.
# Display all NAT configuration and statistics.
[Router] display nat all
NAT outbound information:
There are 1 NAT outbound rules.
Interface: GigabitEthernet1/2
ACL: ---
NO-PAT: N
NAT internal server information:
There are 2 internal servers.
Interface: GigabitEthernet1/2
Protocol: 6(TCP)
Global IP/port: 202.38.1.2/21
Local
Interface: GigabitEthernet1/2
Protocol: 6(TCP)
Global IP/port: 202.38.1.2/80
Local
NAT DNS mapping information:
There are 2 NAT DNS mappings.
Domain name: ftp.server.com
Global IP
Global port: 21
Protocol
Domain name: www.server.com
Global IP
Global port: 80
Protocol
NAT logging:
Log enable : Disabled
Flow-begin : Disabled
Flow-end
Flow-active: Disabled
NAT mapping behavior:
Mapping mode: Address and Port-Dependent
ACL
NAT ALG:
DNS: Enabled
FTP: Enabled
Address group: ---
Reversible: N
IP/port: 10.110.10.2/21
IP/port: 10.110.10.1/80
: 202.38.1.2
: TCP(6)
: 202.38.1.2
: TCP(6)
: Disabled
: ---
Port-preserved: N
152