Configuration Procedure; Verifying The Configuration - H3C MSR 2600 Configuration Manual

Configuration procedure

1. Configure Router A:
# Specify the IP address of Ethernet 1/1.
<RouterA> system-view
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ip address 10.1.1.1 24
[RouterA-Ethernet1/1] quit
# Enable DHCP.
[RouterA] dhcp enable
# Exclude an IP address from dynamic allocation.
[RouterA] dhcp server forbidden-ip 10.1.1.2
# Configure DHCP address pool 0 and specify the subnet, lease duration, DNS server address,
and a static route to subnet 20.1.1.0/24.
[RouterA] dhcp server ip-pool 0
[RouterA-dhcp-pool-0] network 10.1.1.0 mask 255.255.255.0
[RouterA-dhcp-pool-0] expired day 10
[RouterA-dhcp-pool-0] dns-list 20.1.1.1
[RouterA-dhcp-pool-0] option 121 hex 181401010A010102
2. Configure Router B:
# Configure Ethernet 1/1 to use DHCP for IP address acquisition.
<RouterB> system-view
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] ip address dhcp-alloc
[RouterB-Ethernet1/1] quit

Verifying the configuration

# Use the display dhcp client command to display the IP address and other network parameters assigned
to Router B.
[RouterB] display dhcp client verbose
Ethernet1/1 DHCP client information:
Current machine state: BOUND
Allocated IP: 10.1.1.3 255.255.255.0
Allocated lease: 864000 seconds, T1: 331858 seconds, T2: 756000 seconds
Lease from May 21 19:00:29 2012
DHCP server: 10.1.1.1
Transaction ID: 0xcde72232
Classless static route:
Destination: 20.1.1.0, Mask: 255.255.255.0, NextHop: 10.1.1.2
DNS server: 20.1.1.1
Client ID type: acsii(type value=00)
Client ID value: 000c.29d3.8659-Eth1/1
Client ID (with type) hex: 0030-3030-632e-3239-
to May 31 19:00:29 2012
6433-2e38-3635-392d-
4574-6830-2f30-2f32
67