HEIL DuraPack 5000 2017 Operation Manual page 98

High-compaction rear loader.
Table of Contents

Advertisement

CHECKS AND INSPECTIONS
BODY AND CHASSIS STREET SIDE INSPECTION
Left hand tailgate door is secured with quick disconnect pin AND wing screw
Make sure tailgate is locked.
Inspect tailgate lock components.
Clamp components for wear and damage
Loose or missing mounting hardware
Inspect tailgate raise components.
Cylinder, hoses and fittings for leaks
Hoses for wear and damage
Cylinder for damage
Loose or missing mounting hardware
Check air pressure of tires. Add air to any tire with air pressure lower than recommended before going on route.
Check wear of tire treads. Replace any tire worn below tire manufacturer's recommendation or state requirements
before going on route.
Check tires for damage. Replace any damaged tire before going on route
Inspect all decals on street side body for damage and readability.
Inspect body structure for damage, loose or missing nuts and bolts and for cracked welds.
Inspect body mounting brackets for cracked weld, missing bolts or nuts or movement.
Issued September 2017
Daily Checklist
®
DuraPack
5000
INSPECTION
RESULTS CODE
Copyright 2017, Heil Environmental
Printed in U.S.A.
90

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents