Optional Outside Controls - HEIL DuraPack 5000 2017 Operation Manual

High-compaction rear loader.

Table of Contents

Enlarged version

OPTIONAL OUTSIDE CONTROLS

The optional outside controls include levers to operate the

optional hydraulic equipments such as:

Reeving mechanism

Winch

Arm mechanism

Roll bar

Cart tipper

There are several combinations of optional equipment. The

controls for optional equipment are usually located on the

curb side of the unit, but may also be located on the street

side of the unit. You must become familiar with the optional

equipment and their controls that are on your unit. See the

figure to the right.

You must secure the refuse bin with the latch bar before

you lift the refuse bin with any of the optional container lift

equipment except the arm mechanism and the cart tipper.

An additional throttle advance toggle switch is installed

when there is at least one optional lifting equipment. The

switch is a momentary switch which means that you must

PRESS and HOLD the switch to increase the engine

RPMs. It is located on the same plate as the buzzer. The

engine RPMs decrease as soon as you stop pressing the

switch. You use the switch to increase the RPMs of the

engine which increases the hydraulic oil flow. The

increased flow of hydraulic oil increases the speed of the

optional lifting equipment.

Issued September 2017

Controls, Switches, and Indicator Lights

DuraPack

5000

Figure 49. Optional Container Lift

Controls (1 of 2)

Figure 50. Optional Container Lift

Controls (2 of 2)

Printed in U.S.A.

Table of Contents

Show Quick Links

Table of Contents