HEIL DuraPack 5000 2017 Operation Manual page 96

CHECKS AND INSPECTIONS
Inspect level of hydraulic oil if tank is mounted on curb side. It must be full. Add recommended oil as necessary.
Inspect body structure for damage, loose or missing nuts and bolts and for cracked welds and metal.
Inspect body mounting brackets for cracked welds, missing bolts or nuts or movement.
Inspect decals on curb side body for damage and readability.
Inspect decals on body prop for damage and readability.
Check air pressure of tires. Add air to any tire with air pressure lower than recommended before going on route.
Check wear of tire treads. Replace any tire worn below tire manufacturer's recommendation or state requirement
before going on route.
Check tires for damage. Replace any damaged tire before going on route.
Inspect tailgate raise components.
Cylinder, hoses and fittings for leaks
Hoses for wear and damage
Cylinder for damage
Loose or missing mounting hardware
Inspect tailgate lock components
Clamp components for wear and damage
Loose or missing mounting hardware
Make sure tailgate is locked
Issued September 2017
Daily Checklist
®
DuraPack 5000
INSPECTION
RESULTS CODE
Copyright 2017, Heil Environmental
Printed in U.S.A.
88