HEIL DuraPack 5000 2017 Operation Manual page 195

HEIL CNr
(CONTINUED)
Ignition Power OFF
The display notification shown in the figure below will only
does not have Ignition Power. This Alarm can be beneficial
in the event that all Tank Solenoids Valves have failed to
open due to the loss of Ignition Power, which is required to
open the Tank Solenoids Valves.
Figure 104. Display
Screenshot: Ignition Power
Issued September 2017
Compressed Natural Gas (CNG) Option
DuraPack
OFF
®
5000
System Over Voltage
The display notification shown in the figure below will only
be displayed in the event that the System Voltage is greater
than 36 volts for 10 seconds, indicating that there is voltage
too high to safely operate the Cortex Controller and
Display.
Figure 105. Display
Screenshot: System Over
Voltage
Copyright 2017, Heil Environmental
Printed in U.S.A.
187