Loading Refuse With An Arm Mechanism (Continued) - HEIL DuraPack 5000 2017 Operation Manual

LOADING REFUSE WITH AN ARM
MECHANISM (CONTINUED)
c. After the refuse container is empty of refuse, PUSH
the control lever for the arm mechanism until the
refuse bin rests firmly on the ground. (RELEASE the
Throttle Advance Switch if you pressed it during
loading.)
d. RELEASE the container from the arm mechanism.
e. PULL the control lever for the arm mechanism until
the arms are fully up and folded.
f. MOVE the container to its pick-up location.
Figure 63. Arm Mechanism Setup
Issued September 2017
On-Route Operation Procedures
®
DuraPack 5000
Figure 64. Loading Refuse with Arm Mechanism
123
Copyright 2017, Heil Environmental
Printed in U.S.A.