Standard Outside Controls (Continued) - HEIL DuraPack 5000 2017 Operation Manual

STANDARD OUTSIDE CONTROLS
(CONTINUED)
E. THROTTLE ADVANCE Switch
Use this switch to increase engine RPMs and the flow of
hydraulic fluid when you use the ejector panel to push
refuse out of the body. You must enable this switch by
MOVING the in-cab THROTTLE ADVANCE enable
switch to ON. See the figure below.
Figure 46. Front Street Side Controls
Issued September 2017
Controls, Switches, and Indicator Lights
®
DuraPack 5000
F. BUZZER Switch
Without any options, this switch is located on curb side
of the tailgate near the grab handle. This switch may be
located in different areas depending on optional
container lifting devices. See the figure below.
1. PUSH the switch IN to activate the buzzer in the cab
when the helper is on the riding step and ready for
the unit to move to the next pickup location.
2. RELEASE the switch to stop the buzzer in the cab.
3. MAKE SURE you (the helper) are ready for the unit
to move. This means that you observe the safety
message for using the riding step.
Figure 47. Buzzer Switch Location
Copyright 2017, Heil Environmental
71
Printed in U.S.A.