Sleep Function; Brightness Control - Sangean U5 DBT Manual

Sleep function

Your radio can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted
between 15 and 120 minutes. Ensure your radio is switched on.
1
To set the desired sleep time, press the Menu button to enter the menu of the current mode.
2
Rotate the Tuning control knob until "Sleep" is shown on
the display. Press the Tuning control knob to enter the
setting. The sleep settings available are 15, 30, 45, 60, 90
or 120 minutes. Press the Tuning control knob to confirm
the setting. The display will exit the sleep options. The
sleep symbol 'S' will show on the display. Your radio will
switch off after the preset sleep time has elapsed.
3
To cancel the sleep timer and switch off your radio before
the chosen sleep time has elapsed, press the Power On /
Off button. To cancel the sleep timer without switching off
your radio, go back to the sleep timer settings (step 1 to 2)
and select the "Sleep off" option in step 2.
4
To view the remaining time of an active sleep timer on the display, press the Menu button to
enter the menu of the current mode. Rotate the Tuning control knob until "Sleep" is shown
on the display and then press the Tuning control knob.

Brightness control

The brightness of the display can be adjusted for when the radio is in standby and for when it is in
use. If you use the unit in the bedroom, you may prefer a lower standby brightness level than a higher
brightness setting.
1
Press the Power On / Off button to switch on your radio.
2
Press the Menu button to access the menu for the current mode.
3
Rotate the Tuning control knob to select "System" and
press the Tuning control knob to enter the system settings
menu.
038
FM
<Sleep
Set sleep time
15 minutes
Set sleep time
Sleep off
FM
<System
>
>