When The Alarm Sounds; Sleep Function; Snooze Function; Loudness Function - Sangean WR-50 Operating Instruction

When the alarm sounds

To cancel a sounding alarm, press the standby button.
When the buzzer alarm activates, the alarm will start softly and
gradually increase in level. It will sound for 1 minute and silence for
1 minute in repetition for 60 minutes unless cancelled. The radio will
sound non-stop at the selected time for up to 60 minutes for other alarm
types.

Snooze function

1. When the alarm sounds, press any button other than the standby
button will silence the alarm for 5 minutes. The symbol for snooze will
appear and flash on the display. The Alarm icon will also flash on the
display.
2. To adjust the silence time for the snooze timer, press and release the
Menu button to enter the menu setting.
3. Rotate the Tuning control knob until "SNOOZE X" appears on the
display, then press and release the Select button to enter the setting.
The digit "X" will flash, rotate the Tuning control knob to adjust the
silence time from 5, 10, 15 and 20 minutes for the snooze timer.
Press and release the Select button to confirm the setting.
4. To cancel the snooze timer while the alarm is suspended, press and
release the standby button.
Disabling / cancelling alarms
To disable an active alarm before the alarm sounds, press and hold the
corresponding alarm button until there is a beep sound to cancel the
alarm. The BUZZER or Radio alarm icons will disappear.
15

Sleep function

Your radio can be set to turn off automatically after a preset time has
elapsed. The sleep timer setting can be adjusted between 15,30, 45,
60, 90 and 120 minutes. Ensure your radio is switched off.
1. To set the desired sleep time, press and hold the standby button to
enter the Sleep timer setting. 'SLEEP XX' will show on the display.
2. Keep pressing the standby button and the Sleep timer options will
start switching on the display. Stop until the required Sleep timer
setting appears on the display. The setting will be saved and the LCD
will return to normal display.
3. Your radio will switch off automatically after the preset sleep timer
has elapsed. The sleep timer icon will show on the display indicating
an active Sleep timer.
4. To cancel the sleep timer function before the preset time has
elapsed, simply press and release the standby button to turn the unit
off manually.

Loudness function

The loudness effect will be more audible when the radio is in lower
volume level to get compensation on lower frequencies.
1. Press and release the Menu button to access the menu for the
current mode.
2. Rotate the Tuning control knob to select "LOUD ON" option. The
loudness function is applied.
3. To turn off the loudness function, press and release the Tuning
control knob when the display shows "LOUD ON". The "ON" will
flash, rotate the Tuning control knob to select "OFF" and press the
Select button to confirm the setting.