Socket For Software Upgrade - Sangean U5 DBT Manual

Socket for software upgrade

From time to time, new software features for your radio may be developed. Your radio has therefore
been designed to allow its internal software to be updated using your USB upgrade port. You should
not attempt to update your radio unless it is recommended to you by Sangean Customer Services.
Updating the software may remove all radio station presets and settings from your radio.
Software updates for your radio may be available in the future. As software updates become available
software and information on how to update your radio can be found at:
http://sg.sangean.com.tw/first/first.asp
http://www.sangean.eu
www.sangean.com.au
For more information, please contact our Head Office by sending an email to info@sangean.com
1
Using the micro USB cable (not supplied) to connect the USB socket in the battery
compartment and your PC.
2
With your radio switched on, press the Menu button to access the menu for the current
mode.
3
Rotate the Tuning control knob to select "System" and
press the Tuning control knob to enter the system settings
menu.
4
Rotate the Tuning control knob to select "Software
Upgrade" and press the Tuning control knob to enter the
setting.
5
Rotate the Tuning control knob to select "Yes" or "No". If
you do not wish to carry out a software upgrade, select
"No" and press the Tuning control knob to confirm the
setting.
6
With "Yes" selected, press the Tuning control knob. The
display will show "Waiting for PC wizard".
7
Go to the website above to download the latest software. Follow the on-screen instructions
on your PC provided with the upgrade software to complete the software upgrade.
NOTE
Please use AC power cord as main power when upgrading software. Do not switch off
the power to the radio until the update operation is complete and the radio has restarted,
otherwise the unit may become permanently damaged.
FM
<System
System
<Software Upgrade>
Upgrade?
Yes <No>
Upgrade?
<Yes> No
>
041