Using The Radio For The First Time; Operating Your Radio - Dab - Sangean U5 DBT Manual

Using the radio for the first time

1
Place your radio on a flat surface.
2
Straighten up the antenna.
3
Plug the AC power cord into an AC socket. The display
will show "Welcome to Digital Radio" for a few seconds.
After short time, the current time will appear on the
display.
4
If no time is displayed, the screen will show "00:00".
Press the Power On / Off button to turn on your radio and
it will find a DAB clock radio stations. It may be necessary
to relocate your radio to a position giving better reception
and carry out a scan to find stations as described in later
sections.
IMPORTANT
The mains plug is used as the means of connecting the radio to the mains supply. The mains
socket used for the radio must remain accessible during normal use. In order to disconnect
the radio from the mains completely, the mains plug should be removed from the mains
outlet completely.
Operating your radio – DAB
1
Straighten the antenna properly which is for both DAB and FM reception. Press the Power
On / Off button to switch on your radio.
2
Press the Source button to select DAB band.
3
If this is the first time the radio is used, a quick scan of Band III DAB channels will be carried
out. If the radio has been used before, the last used station will be selected.
012
Welcome to
Digital Radio
00:00
Time is not set