Prune Stations - Sangean U5 DBT Manual

Station order setup
3
Press the Menu button to access DAB menu.
4
Rotate the Tuning control knob until the display shows
"Station order". Press the Tuning control knob to enter the
station order adjustment mode.
5
Rotate the Tuning control knob to choose "Alphanumeric"
or "Ensemble".
"Alphanumeric" -sorts the station list alpha-numerically
0...9 A...Z.
"Ensemble" – sorts the station list by DAB multiplex.
The current setting is indicated by an asterisk.
6
Press the Tuning control knob to select the required station order.

Prune stations

If you move to a different part of the country, some of the stations which were listed may no longer be
available.
Also from time to time, some DAB services may stop broadcasting, or may change location or
frequency.
Stations which cannot be found, or which have not been received for a very long time are shown in the
station list with a question mark. The prune stations function will delete the marked DAB stations from
your station list.
1
Press the Menu button to access DAB menu.
2
Rotate the Tuning control knob to find "Prune". Press and
release the Tuning control knob to enter adjustment mode.
Then rotate the Tuning control knob to select "Yes" or "No".
To activate the Prune function select "Yes", and press and
release the Tuning control knob to confirm the setting.
018
DAB
<Station order
Station order
<Alphanumeric
Station order
<Ensemble
DAB
<Prune
Prune?
<Yes> No
>
*
>
>
>