Scan Sensitivity Setting - Fm - Sangean U5 DBT Manual

Scan sensitivity setting – FM
Your radio includes a local / distant option for the auto-scan function. By setting the radio to the 'local'
scan option, weaker signals from more distant transmitters can be ignored by the radio, making
stronger signals easier to find.
1
Press the Power On / Off button to switch on your radio.
2
If needed, press and release the Source button until the FM band is selected.
3
Press the Menu button to access FM menu. Rotate the
Tuning control knob until "FM Scan Zone" shows on the
display. Press and release the Tuning control knob to
enter the scan sensitivity adjustment mode. The current
setting will be marked with an asterisk.
4
Rotate the Tuning control knob to switch between "Local"
(Strong stations only) and "Distant" (All stations) options
on the lower line of the display. The "Distant" option will
allow the radio to find weaker signals when scanning.
5
Press and release the Tuning control knob to confirm your selection. The setting is stored in
the radio and remains in force until changed or until a System Reset.
FM
<FM Scan Zone
FM Scan Zone
<Distant
FM Scan Zone
<Local
>
*
>
>
021