Software Version; Auxiliary Input Socket - Sangean U5 DBT Manual

Software version

The software display cannot be altered and is just for your reference.
1
With your radio switched on, press the Menu button to access the menu for the current
mode.
2
Rotate the Tuning control knob to select "System" and
press the Tuning control knob to enter the system settings
menu.
3
Rotate the Tuning control knob until "SW version" appears
on the display and press the Tuning control knob. The
software version shows on the display.
4
Press and release the Menu button to exit the software version display.

Auxiliary input socket

The 3.5mm Aux In socket is to connect audio source like MP3 player or CD walkman and listen the
audio program via radio speaker.
1.
Connect a stereo or mono audio source (like CD walkman or MP3 player) to the Aux In socket,
which is located on the right hand side, behind the rubber cover.
2.
Press the Power On / Off button to switch on your radio.
3.
Press the Source button until "AUX IN" mode is shown on the display.
4.
Play the file in the CD walkman or MP3 player.
5.
Adjust the volume control to the required level.
NOTE
Make sure the rubber cover of the Aux In socket is closed well after use to prevent moist and dirt
from entering the radio. Never use the Aux In socket in rainy or moist conditions to prevent moist
from entering the radio. Keep the rubber cover always closed under these conditions.
042
FM
<System
System
<SW version
>
>