Using Usb Memory Devices - Sangean U5 DBT Manual

Using USB memory devices

IMPORTANT
1.
Your radio is only designed to work with USB flash memory devices. It is not intended to be
connected to hard disk drives or any other type of USB device.
2.
It is possible to use SD or SDHC cards for media playback when held in a suitable USB
adaptor. However, due to the wide variation of such adaptors, it is not possible to guarantee
that all adaptor / card combinations will work with the radio.
3.
The radio has been tested with a range of USB memory devices of up to 32GB capacity. It
supports USB 2.0 full speed and USB 3.0.
NOTE
when using USB 3.0, please allow the radio to detect the device for a longer period of
time.
4.
USB memory must use the FAT or FAT 32 filing system in order to operate with the radio, it
does not support NTFS.
5.
Audio formats supported for playback are MP3, WMA and AAC. Playback does not support
files encoded using WMA lossless, WMA Voice, WMA 10 professional, nor files of any format
which have DRM protection.
CAUTIONS
1.
In order to minimize the risk of damage to your radio, your USB Memory, please place the
radio such that the device cannot easily be knocked while it is inserted in the socket.
2.
Remove the USB before carrying the radio or if not using the USB feature for a prolonged
period.
3.
Turn off the radio before removing your USB memory device.
4.
The USB connection is intended only for flash memory devices. The use of hard disk storage
media is not supported.
5.
Playback via USB files stored on MP3 players is not guarantee.
6.
Large file size or high memory USB device takes longer time to read.
026