Factory Reset - Sangean U5 DBT Manual

Factory reset

If your radio fails to operate or some digits on the display are missing or incomplete, carry out the
following procedure.
1
Press the Power On / Off button to switch on your radio.
2
Press the Menu button to access the menu for the current mode.
3
Rotate the Tuning control knob to select "System" and
press the Tuning control knob to enter the system settings
menu.
4
Rotate the Tuning control knob to select "Factory Reset"
and press the Tuning control knob to enter the setting.
5
Rotate the Tuning control knob to select "Yes" or "No". If
you do not wish to carry out a system reset, select "No"
and then press the Tuning control knob to confirm the
setting.
6
With "Yes" selected, press the Tuning control knob. A full
reset will be performed. All presets and station lists will be
erased. All settings will be set to their default values. After
a system reset, the radio will be restarted.
The display will show "Welcome to Digital Radio" and
a scan of the DAB band III will be performed. In case
of malfunction due to electrostatic discharge, reset the
product (reconnection of power source may be required)
to resume normal operation.
040
FM
<System
System
<Factory Reset
Factory Reset?
Yes <No>
Factory Reset?
<Yes> No
>
>