Table of Contents
Advertisement
Storing and recalling preset stations in the
FM radio mode
The WFR-28BT features 40 memory presets for FM
radio. After selecting the FM radio mode, the procedure
for storing and recalling preset stations in the FM radio
mode is identical to the procedure in the DAB radio mode.
Please refer to the instruction in the previous chapter for
details on how to store and recall preset stations.
10. Listening to Bluetooth audio
In order to stream Bluetooth music to your radio, you need
to pair your Bluetooth device with the WFR-28BT. Pairing
creates a 'bond' so two devices can recognize each other.
Pairing your Bluetooth device for the first
time
1.
Turn on the radio using the Power button.
GB
2.
Select the Bluetooth mode by repeatedly pressing the
Mode button or using the radio's Main menu. After
selecting the Bluetooth mode, the radio's display will
show the Bluetooth logo with the text [No connect] and
you will hear a sound.
3.
Activate Bluetooth on your Bluetooth device (refer to the
manual of the Bluetooth device if you are unsure about
how to active Bluetooth).
4.
Go to the Bluetooth list on your Bluetooth device and
select the device named "WFR-28BT" (if you have
changed the name of the radio in the radio's System
settings menu, search for the name you have given the
radio instead).
Note:
On some Bluetooth devices with Bluetooth version
2.1 or earlier, you might be requested to enter a
passcode. If this is the case, enter the passcode
"0000".
5.
After the devices have paired and connected, a
confirmation tone will be played on the radio. The
radio will show the playback progress on the display
and a Bluetooth icon will be shown in the bottom bar
of the radio's display. You can now play music on your
Bluetooth device and stream the music through the
radio's speaker.
Notes:
● If 2 Bluetooth devices are pairing for the first time,
both must search for your radio, it will show its
availability on both devices. However, if one device
links with this unit first, then the other Bluetooth
device won't find it on the list.
● If you take your Bluetooth device out of range,
the connection between your device and the radio
will be temporarily disconnected. Your radio will
automatically reconnect if the Bluetooth device is
brought back into range. Be aware that during the
period of disconnection, no other Bluetooth device
can pair or link with your radio.
14
● If "WFR-28BT" shows up in your Bluetooth device
list, but your Bluetooth device cannot connect with
it, please delete the item from your list and pair the
Bluetooth device with the radio again following the
steps described previously.
● The effective operation range between the radio
and the paired Bluetooth device is approximately 10
meters (30 feet). Any obstacle between the system
and the device can reduce the operational range.
● Bluetooth connectivity performance may vary
depending on the connected Bluetooth device.
Please refer to the Bluetooth capabilities of your
device before connecting it to your radio. Not all
features may be supported, depending on the
Bluetooth device used.
● With some mobile phones, making / receiving
calls, text messages, e-mails or any other activities
unrelated to audio streaming may mute the
Bluetooth audio streaming or even temporarily
disconnect from your device. Such behavior is
a function of the Bluetooth device and does not
indicate a problem with your WFR-28BT.
Audio playback in the Bluetooth mode
When you have successfully connected your radio with
the chosen Bluetooth device, you can start to play your
music using the controls on the radio or your connected
Bluetooth device.
1.
After connecting a Bluetooth device, the playback status
will be displayed at the bottom of the radio's display.
2.
The volume can be adjusted both on the radio using the
Volume + / - button and on the Bluetooth device using
the volume control of the device.
Playback can be controlled both on the radio and on
the Bluetooth device as well. When using the radio's
controls:
● Press the Play / Pause button to start audio playback
or to pause / resume playback.
● Press the Next or Previous button to go to the next or
previous track.
● Press and hold the Next or Previous button to fast
forward or rewind within a track and release the
button when the desired point is reached.
Note:
Not all player applications or devices may respond to
all of these controls.
Audio playback from a previously-paired
Bluetooth device
The WFR-28BT can memorize up to 8 sets of paired
Bluetooth devices, when the memory exceed this amount,
the earliest device with which the radio was paired will be
overwritten in the radio's memory.
If your Bluetooth device has paired with the WFR-28BT
previously, the radio will still remember your Bluetooth
device and attempt to reconnect with the device that was
last connected. If the last connected Bluetooth device is
not available, the radio will try to connect to the second
last Bluetooth device.
Advertisement
Table of Contents
