Table of Contents
Advertisement
18.7.99
De-registering a handset from a base station
B
Ring priority for incoming calls
Switching between collective ringing and ring priority
O
kap15.fm5
#
o
Enter four-digit base code (
"0000") and then press
ternal numbers are shown on the display:
:
2 3 4 5 6
f
2
6
Enter one of the available internal numbers. The handset
...
is now registered.
# 7 2
Start setting procedure.
Enter the four-digit base code (factory default:"0000")
o
(
page 19). All registered handsets are shown on the
display.
B
o
Enter the internal call number of the desired handset (1
to 6) and confirm by pressing
It is possible to set how incoming calls should be sig-
nalled when operating several handsets. A distinction is
made between:
Collective call (factory default) – incoming calls are
signalled to all registered handsets.
You can exclude individual handsets from the collec-
tive call and reintegrate previously excluded hand-
sets.
Ring priority – an incoming external call is first sig-
nalled to a prioritised handset. If this party does not
accept the call, the system automatically switches to
"collective call" after an adjustable number of rings.
# 1
B
Start the setting procedure.
Enter the four-digit base code (factory default:"0000")
o
(
page 19).
* 2 3
The current setting is shown on the display
:
n 23 1
P f
1
B
Set collective ringing.
or
2
B
Set ring priority.
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Operating more than one handset
page 19) (factory default:
#
. The remaining available in-
(Example: 2,3,4 ,5 and 6
N
b
are available)
B
.
(Example:1 = collective
N
b
ringing is set)
49
Advertisement
Table of Contents
