Table of Contents
Advertisement
18.7.99
Activating/deactivating the call duration display
kap10.fm5
In the case of external calls (
display is started approximately 12 seconds after the last
digit is dialled. The display remains visible for about four
seconds after the call is finished. The call duration display
can be switched on and off.
# 1
B
Start setting procedure.
o
Enter the four-digit system code (factory default "0000").
9 6
O
The current setting is shown on the handset display:
96 1 = on, 96 0 = off.
1
B
Switch on the call duration display.
or
0
B
Switch off the call duration display.
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Handset settings
page 24), the call duration
The factory default for the call duration display is
"on" .
39
Advertisement
Table of Contents
