Table of Contents
Advertisement
18.7.99
De-registering a handset from a base station
. t Service
Ring priority for incoming calls
Switching between collective ringing and ring priority
. t Service
u
REDIAL.
KAP15.FM5
t means: browse using x
(
Call up the "Service" menu item.
# 7 2
Start the setting procedure.
o
Enter the four-digit base code (factory default: "0000")
(
page 7). All registered handsets are shown on the dis-
play.
x
o
Enter the internal call number of the desired handset (1
SET
to 6) and confirm by pressing x
It is possible to set how incoming calls should be signaled
when operating several handsets. A distinction is made
between:
Collective call (factory default) – incoming calls are
signaled to all handsets. You can exclude individual
handsets from the collective call and reinclude previ-
ously excluded handsets.
Ring priority – an incoming external call is first signal-
ed to a prioritized handset. If this party does not ac-
cept the call, the system automatically switches to
"collective call" after an adjustable number of rings.
t means: browse using x
(
Call up the "Service" menu item.
# 1
Start the setting procedure.
o
Enter the four-digit base code (factory default: "0000")
(
page 7).
: 2 3
The current setting is shown on the display
:
*23 1
SET
1 x
Set collective ringing.
SET
or
2 x
Set ring priority.
SET
Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Operating more than one handset
confirm using u
Z
,
SET
confirm using u
Z
,
(Example:1 = collective
ringing is set)
SET
RUF AUS
REDIAL
)
OK
.
)
OK
49
Advertisement
Table of Contents
